Stop Overpaying for Krones Contiform Lamps
Let’s be honest: OEM heating lamps are expensive. When you’re running a Krones Contiform line, those costs can spiral quickly, eating into your maintenance budget for no good reason. We decided to fix that. We’ve built a drop-in replacement that does exactly what the SMI and Krones originals do—minus the massive brand-name markup. The technical side of things These lamps handle high voltage to get PET preforms soft and ready in an instant. We’ve dialed in the wattage-to-length ratio so the heat hits exactly where it needs to. The best part? The infrared wavelength is the same as the original. That means you don’t have to spend your weekend messing with oven timings or rewriting your temperature settings. It just works. Built to actually last We use heavy-wall quartz glass. Why? Because cheap glass bows when it gets hot, and that’s a recipe for failure. We also use a halogen cycle to stop the tungsten filament from evaporating too fast. It simply lasts longer. As for the fit, we use standard R7s or Sk15 connectors. You just slide them into your existing sockets. No rewiring, no modifying holders, no headaches. A quick heads-up on your oven Here is the thing: high-wattage lamps put a lot of stress on your ventilation. If your cooling fans are clogged with dust or starting to give out, these lamps will bake the housing and burn out early. Keep your airflow clear. It’s the easiest way to make sure you get every hour of life out of the bulb. You can swap these in during your next scheduled downtime, power them up, and get back to full production. You’ll keep the bottle clarity and wall distribution you need, but you’ll stop spending a fortune on consumables.